Ricoh Theta Paso Double option: What Is it For & How to Use it?

Theta camera uses two lenses, each covering 180 degree field of view in order to compile spherical panorama. Capturing actives both lenses at the same time, often causing photographer being present in end result. Paso Double option is used to prevent people from being caught in final image by triggering two 360 degree captures per spin taken. Total of four half spherical images are combined and processed on the device resulting in clean, non-obstructed 360 image.

Below is a short tutorial on how to properly utilize this option:

1. Create a new room within the project and select the option to capture a spin

2. Select the Capture Paso Double option

3. During the first spin capture, you should remain stationary. Click Continue

4. Before starting the second capture, move to the opposite side of the camera and then capture another spin.

5. A final result will be shown so you can review and recapture if necessary

• Related Articles

• Ricoh Theta: Theta Native HDR option

  When taking photos with the Ricoh Theta camera, the default setting captures 3 images with different exposure values (low, normal and high), which are then combined into one high-quality HDR 360 picture. If you would like to disable this option, ...

• How do I connect the Ricoh Theta camera to start the scanning process?

  Pairing your Ricoh Theta camera with InsideMaps app fairly simple: 1. Create a new project 2. Select the desired package 3. Change the default scanning device to Ricoh Theta 4. Press Add and select room type 5. Select the Floor level and Door/Ceiling ...

• Does InsideMaps support 360-degree cameras?

  Our technology supports RICOH's Theta V and Theta Z1 360-degree cameras. Items you need to have for scanning with RICOH Theta camera: iPhone/iPad with InsideMaps Capture app installed RICOH Theta V/ Z1/ X Tripod. Learn how to setup an create you ...

• How to use filters in the app

  If you're looking to view a specific category of scans in the app, you can use filters to display only Completed, Unfinished, Processing or Uploading scans. 1. Go to Filters option on the main screen 2. Select the desired category by Status (All, ...

• About Capture Settings in the App

  Below you will find a brief explanation of different options you can enable via Menu -> Settings -> Capture Settings based on your needs and preferences: Mobile Data Photo Upload - This option allows the user to upload the project using cellucar ...