What batteries should I use with HERO Rotor?

What batteries should I use with HERO Rotor?

You can order InsideMaps HERO Battery kit from Amazon using this link.

Below are our recomendations:
  1. Prefered
  2. Second choice

Battery Specifications that should be used with InsideMaps HERO Rotor:

Type: 18650 Unprotected Button top
Minimum mAh: No minimum, more mAh means longer scanning times (we recommend more than 2000mAh for the best experience)
Continuous Discharge Rating (CDR):  Minimum of about 5A CDR
Voltage: 3.6V
"Protected" VS "Unprotected": Unprotected batteries only, Protected 18650 batteries are physically to large and will get stuck






    • Related Articles

    • Which devices are compatible with InsideMaps HERO 360 Rotor?

      Our HERO Rotors are compatible with all iPhone models starting from iPhone 15 to iPhone 6s models. Please visit our web shop for assistance with choosing the right size of HERO Rotor depending on your iPhone model.

    • How can I replace iPhone holder on HERO rotor

      The iPhone holders attached to the HERO rotor are replaceable components of InsideMaps equipment.If they incur physical damage, replacements can be ordered through the InsideMaps web shop. Below is a guide on how to exchange the holders on the HERO ...

    • How do I establish a bluetooth connection between my iPhone and the HERO device?

      Hero should be connected through the app, not the system (iOS) Bluetooth settings. Insert a battery in HERO rotor and turn it on by pressing the small button located on the left side of the rotor. Led light should turn green. Turn on Bluetooth on ...

    • Does InsideMaps support Android devices?

      Unfortunately, our technology does not support Android devices at the moment. You can use our application with iPhone + InsideMaps HERO Rotor or iPhone/iPad + Ricoh Theta V/Z1/X 360-degree camera. We plan to start supporting Android devices shortly. ...

    • How do I connect the Ricoh Theta camera to start the scanning process?

      Pairing your Ricoh Theta camera with InsideMaps app fairly simple: 1. Create a new project 2. Select the desired package 3. Change the default scanning device to Ricoh Theta 4. Press Add and select room type 5. Select the Floor level and Door/Ceiling ...